產品展廳
|
Qnity PI Kapton 200FN919
- 品牌：Qnity
- 型號：卷
- 價格： ￥137/盒
- 發布日期： 2025-11-28
- 更新日期： 2025-12-18
產品詳請
| 品牌 | Qnity |
| 貨號 | |
| 用途 | 航空航天 |
| 牌號 | PI Kapton 200FN919 |
| 型號 | Kapton 200FN919 |
| 品名 | PI |
| 包裝規格 | 卷 |
| 外形尺寸 | 薄膜 |
| 廠家 | Qnity(Dupont 杜邦) |
| 是否進口 |
極高的多功能性和熱性能帶來了無限的潛力
從航天任務相機中的電路到下一代光伏電池,Kapton®聚酰亞胺薄膜正在推動非凡的新設計可能性真正實現。
對于 熱量和振動的應用,設計師依賴Kapton®,因?yàn)樗軌蛟谧類毫拥臈l件下保持獨特的機械性能組合。
Kapton®聚酰亞胺薄膜在45年來一直保持行業標準,在高性能、可靠性和耐用性方面保持著標準,具有獨特的電氣、熱能、化學和機械性能組合,能夠承受 溫度、振動及其他嚴苛環境。
Kapton is a polyimide film used in flexible printed circuits (flexible electronics) and space blankets, which are used on spacecraft, satellites, and various space instruments. Invented by the DuPont Corporation in the 1960s, Kapton remains stable across a wide range of temperatures, from 4 to 673 K (?269 to +400 °C). Kapton is used in electronics manufacturing and space applications, with x-ray equipment, and in 3D printing applications. Its favorable thermal properties and outgassing characteristics result in its regular use in cryogenic applications and in high vacuum environments.
History
Kapton was invented by DuPont in the 1960s. As of November 2025, Kapton is manufactured by Qnity Electronics, a spinoff of DuPont.
The name Kapton is a registered trademark of E. I. du Pont de Nemours and Company.
Chemistry and variants
Kapton synthesis is an example of the use of a dianhydride in step polymerization. The intermediate polymer, known as a poly(amic acid), is soluble because of strong hydrogen bonds to the polar solvents usually employed in the reaction. The ring closure is carried out at high temperatures of 470–570 K (200–300 °C).
The chemical name for Kapton K and HN is poly (4,4'-oxydiphenylene-pyromellitimide). It is produced from the condensation of pyromellitic dianhydride (PMDA) and 4,4'-oxydiphenylamine (ODA).
Kapton E is a mix of two dianhydrides, PMDA and biphenyltetracarboxylic acid dianhydride (BPDA), and two diamines, ODA and p-phenylenediamine (PPD). The BPDA component adds greater dimensional stability and flatness in flexible circuitry applications. Kapton E offers reduced coefficient of thermal expansion (CTE), reduced moisture absorption, and reduced coefficient of hygroscopic expansion (CHE) compared to Kapton H.
Characteristics
In isolation, Kapton remains stable across a wide range of temperatures, from 4 to 673 K (?269 to +400 °C).[5][6]
The thermal conductivity of Kapton at temperatures from 0.5 to 5 Kelvin is rather high for such low temperatures, κ = 4.638×10?3 T0.5678 W·m?1·K?1.
Kapton insulation ages poorly: an FAA study shows degradation in hot, humid environments[8] or in the presence of seawater. It was found to have very poor resistance to mechanical wear, mainly abrasion within cable harnesses due to aircraft movement. Many aircraft models have had to undergo extensive rewiring modifications—sometimes completely replacing all the Kapton-insulated wiring—because of short circuits caused by the faulty insulation. Kapton-wire degradation and chafing due to vibration and heat has been implicated in multiple crashes of both fixed wing and rotary wing aircraft, with loss of life. The New York Times, citing a NASA OIG document, reported in 2005 that Kapton-insulated cables on the Space Shuttle "tended to break down over time, causing short circuits and, potentially, fires." The STS-93 mission saw electrical shorts on Kapton insulation disable two engine controllers and nearly cause catastrophe.
Usage
Kapton tapes, three rolls of different widths
Electronics manufacturing
Kapton tape (yellow) used to insulate the leads of a battery cell in a bluetooth headset
Due to its large range of temperature stability and its electrical isolation ability, Kapton tape is usually used in electronic manufacturing as an insulation and protection layer on electrostatic-sensitive and fragile components. As it can sustain the temperature needed for a reflow soldering operation, its protection is available throughout the whole production process, and Kapton is often still present in the final consumer product.
Spacecraft
Aluminized Kapton thermal cover was used on the Ultra Heavy Cosmic Ray Experiment.
The descent stage of the Apollo Lunar Module, and the bottom of the ascent stage surrounding the ascent engine, were covered in blankets of aluminized Kapton foil to provide thermal insulation. During the return journey from the Moon, Apollo 11 astronaut Neil Armstrong commented that during the launch of the Lunar Module Eagle ascent stage, he could see "Kapton and other parts of the LM staging scattering all around the area for great distances."
Test unit of the James Webb Space Telescope sunshield, made of aluminized Kapton
The NASA Jet Propulsion Laboratory has considered Kapton as a good plastic support for solar sails because of its durability in the space environment.
NASA's New Horizons spacecraft used Kapton in an innovative "Thermos bottle" insulation design to keep the craft operating between 283 and 303 K (10 and 30 °C) throughout its more than nine-year, 5-terametre (33-astronomical-unit) journey to rendezvous with the dwarf planet Pluto on 14 July 2015. The main body is covered in lightweight, gold-colored, multilayered thermal insulation which holds in heat from operating electronics to keep the spacecraft warm. The thermal blanketing of 18 layers of Dacron mesh cloth sandwiched between aluminized Mylar and Kapton film also helped to protect the craft from micrometeorites.
The James Webb Space Telescope sunshield is made of five Kapton E sheets coated with aluminum and doped silicon to reflect heat away from the spacecraft body.
The crew aboard the International Space Station used Kapton tape to temporarily repair a slow leak in a Soyuz spacecraft attached to the Russian segment of the orbital complex in August 2018.[16] It was used again in October 2020 to temporarily seal a leak in the transfer chamber of the Zvezda Service Module of the ISS.
X-rays
Kapton is also commonly used as a material for windows used with all kinds of X-ray sources (synchrotron beam-lines and X-ray tubes) and X-ray detectors. Its high mechanical and thermal stability as well as high transmittance of X-rays make it the preferred material. It is also relatively insensitive to radiation damage.
3D printing
Kapton and ABS adhere to each other very well, which has led to widespread use of Kapton as a build surface for 3D printers. Kapton is laid down on a flat surface and the ABS is extruded onto the Kapton surface. The ABS part being printed will not detach from the build platform as it cools and shrinks, a common cause of print failure by warping of the part.A more durable alternative is to use a polyetherimide surface.
Researchers have devised a method to 3D-print polyimide material including Kapton. The polyamic acid precursor to Kapton is mixed with an acrylate cross linker and photoinitiator that can form a gel when exposed to ultraviolet light during 3D printing. Subsequent heating of the 3D printed part up to 400 °C removes the sacrificial crosslinks and imidizes the part forming Kapton with a 15D printed geometry.
Others
Kapton's relatively high thermal conductivity at very low temperatures, together with its good dielectric qualities and its availability as thin sheets, have made it a favorite material in cryogenics, as it provides electrical insulation at low thermal gradients.
Kapton is regularly used as an insulator in ultra-high-vacuum environments due to its low outgassing rate.
Kapton-insulated electrical wiring has been widely used in civil and military aircraft because it is lighter than other insulators and has good insulating and temperature characteristics.
從航天任務相機中的電路到下一代光伏電池,Kapton®聚酰亞胺薄膜正在推動非凡的新設計可能性真正實現。
對于 熱量和振動的應用,設計師依賴Kapton®,因?yàn)樗軌蛟谧類毫拥臈l件下保持獨特的機械性能組合。
Kapton®聚酰亞胺薄膜在45年來一直保持行業標準,在高性能、可靠性和耐用性方面保持著標準,具有獨特的電氣、熱能、化學和機械性能組合,能夠承受 溫度、振動及其他嚴苛環境。
杜邦™ Kapton®
杜邦™ Kapton® FN 聚酰亞胺薄膜的特性
熱封強度
薄膜間熱封
單面涂覆 Kapton® 薄膜的涂覆面與未涂覆面之間，或單面和雙面涂覆 Kapton® 薄膜的涂覆面之間的熱封剝離強度，
按以下方式測定。
在 350°C (662°F)、20 psig (1.4 bar) 的條件下，使用鉗式封口機進行熱封，
保溫時間為 20 秒。冷卻后，使用 Thwing-Albert JDC 樣品切割器或其等效工具將密封件切割成 1 英寸（25.4 毫米）寬的條狀。使用 Instron 型拉伸試驗機測量密封強度。密封強度定義為每個密封件中出現的峰值瞬時強度。取五個試樣的平均值。
單面或雙面涂覆 Kapton® 涂層兩側之間的最小剝離強度為 700 g/in (2.7 N/cm)，但 120FN616 除外，其最小剝離強度為 450 g/in (1.7 N/cm)。單面涂覆 Kapton® 涂層側和未涂層側之間的最小剝離強度為 450 g/in (1.7 N/cm)。
薄膜-銅密封
FEP 薄膜與銅的粘合能力采用與“薄膜-銅”部分所述相同的熱封剝離強度技術進行測量。薄膜密封。
剝離強度是在FEP側密封到1 mil（25.4 μm）、3/4 oz GT銅箔的未處理側時測量的；其最小值為300 g/in（1.2 N/cm）。
Kapton® HN型和氟聚合物層之間粘合的初始強度（冷剝離）
除120FN616外，所有Kapton® FN產品上Kapton® HN和氟碳樹脂層之間的粘合強度最小值為225 g/in（0.87 N/cm），使用Instron型拉伸試驗機和180°剝離進行測量。
Kapton is a polyimide film used in flexible printed circuits (flexible electronics) and space blankets, which are used on spacecraft, satellites, and various space instruments. Invented by the DuPont Corporation in the 1960s, Kapton remains stable across a wide range of temperatures, from 4 to 673 K (?269 to +400 °C). Kapton is used in electronics manufacturing and space applications, with x-ray equipment, and in 3D printing applications. Its favorable thermal properties and outgassing characteristics result in its regular use in cryogenic applications and in high vacuum environments.
History
Kapton was invented by DuPont in the 1960s. As of November 2025, Kapton is manufactured by Qnity Electronics, a spinoff of DuPont.
The name Kapton is a registered trademark of E. I. du Pont de Nemours and Company.
Chemistry and variants
Kapton synthesis is an example of the use of a dianhydride in step polymerization. The intermediate polymer, known as a poly(amic acid), is soluble because of strong hydrogen bonds to the polar solvents usually employed in the reaction. The ring closure is carried out at high temperatures of 470–570 K (200–300 °C).
The chemical name for Kapton K and HN is poly (4,4'-oxydiphenylene-pyromellitimide). It is produced from the condensation of pyromellitic dianhydride (PMDA) and 4,4'-oxydiphenylamine (ODA).
Kapton E is a mix of two dianhydrides, PMDA and biphenyltetracarboxylic acid dianhydride (BPDA), and two diamines, ODA and p-phenylenediamine (PPD). The BPDA component adds greater dimensional stability and flatness in flexible circuitry applications. Kapton E offers reduced coefficient of thermal expansion (CTE), reduced moisture absorption, and reduced coefficient of hygroscopic expansion (CHE) compared to Kapton H.
Characteristics
In isolation, Kapton remains stable across a wide range of temperatures, from 4 to 673 K (?269 to +400 °C).[5][6]
The thermal conductivity of Kapton at temperatures from 0.5 to 5 Kelvin is rather high for such low temperatures, κ = 4.638×10?3 T0.5678 W·m?1·K?1.
Kapton insulation ages poorly: an FAA study shows degradation in hot, humid environments[8] or in the presence of seawater. It was found to have very poor resistance to mechanical wear, mainly abrasion within cable harnesses due to aircraft movement. Many aircraft models have had to undergo extensive rewiring modifications—sometimes completely replacing all the Kapton-insulated wiring—because of short circuits caused by the faulty insulation. Kapton-wire degradation and chafing due to vibration and heat has been implicated in multiple crashes of both fixed wing and rotary wing aircraft, with loss of life. The New York Times, citing a NASA OIG document, reported in 2005 that Kapton-insulated cables on the Space Shuttle "tended to break down over time, causing short circuits and, potentially, fires." The STS-93 mission saw electrical shorts on Kapton insulation disable two engine controllers and nearly cause catastrophe.
Usage
Kapton tapes, three rolls of different widths
Electronics manufacturing
Kapton tape (yellow) used to insulate the leads of a battery cell in a bluetooth headset
Due to its large range of temperature stability and its electrical isolation ability, Kapton tape is usually used in electronic manufacturing as an insulation and protection layer on electrostatic-sensitive and fragile components. As it can sustain the temperature needed for a reflow soldering operation, its protection is available throughout the whole production process, and Kapton is often still present in the final consumer product.
Spacecraft
Aluminized Kapton thermal cover was used on the Ultra Heavy Cosmic Ray Experiment.
The descent stage of the Apollo Lunar Module, and the bottom of the ascent stage surrounding the ascent engine, were covered in blankets of aluminized Kapton foil to provide thermal insulation. During the return journey from the Moon, Apollo 11 astronaut Neil Armstrong commented that during the launch of the Lunar Module Eagle ascent stage, he could see "Kapton and other parts of the LM staging scattering all around the area for great distances."
Test unit of the James Webb Space Telescope sunshield, made of aluminized Kapton
The NASA Jet Propulsion Laboratory has considered Kapton as a good plastic support for solar sails because of its durability in the space environment.
NASA's New Horizons spacecraft used Kapton in an innovative "Thermos bottle" insulation design to keep the craft operating between 283 and 303 K (10 and 30 °C) throughout its more than nine-year, 5-terametre (33-astronomical-unit) journey to rendezvous with the dwarf planet Pluto on 14 July 2015. The main body is covered in lightweight, gold-colored, multilayered thermal insulation which holds in heat from operating electronics to keep the spacecraft warm. The thermal blanketing of 18 layers of Dacron mesh cloth sandwiched between aluminized Mylar and Kapton film also helped to protect the craft from micrometeorites.
The James Webb Space Telescope sunshield is made of five Kapton E sheets coated with aluminum and doped silicon to reflect heat away from the spacecraft body.
The crew aboard the International Space Station used Kapton tape to temporarily repair a slow leak in a Soyuz spacecraft attached to the Russian segment of the orbital complex in August 2018.[16] It was used again in October 2020 to temporarily seal a leak in the transfer chamber of the Zvezda Service Module of the ISS.
X-rays
Kapton is also commonly used as a material for windows used with all kinds of X-ray sources (synchrotron beam-lines and X-ray tubes) and X-ray detectors. Its high mechanical and thermal stability as well as high transmittance of X-rays make it the preferred material. It is also relatively insensitive to radiation damage.
3D printing
Kapton and ABS adhere to each other very well, which has led to widespread use of Kapton as a build surface for 3D printers. Kapton is laid down on a flat surface and the ABS is extruded onto the Kapton surface. The ABS part being printed will not detach from the build platform as it cools and shrinks, a common cause of print failure by warping of the part.A more durable alternative is to use a polyetherimide surface.
Researchers have devised a method to 3D-print polyimide material including Kapton. The polyamic acid precursor to Kapton is mixed with an acrylate cross linker and photoinitiator that can form a gel when exposed to ultraviolet light during 3D printing. Subsequent heating of the 3D printed part up to 400 °C removes the sacrificial crosslinks and imidizes the part forming Kapton with a 15D printed geometry.
Others
Kapton's relatively high thermal conductivity at very low temperatures, together with its good dielectric qualities and its availability as thin sheets, have made it a favorite material in cryogenics, as it provides electrical insulation at low thermal gradients.
Kapton is regularly used as an insulator in ultra-high-vacuum environments due to its low outgassing rate.
Kapton-insulated electrical wiring has been widely used in civil and military aircraft because it is lighter than other insulators and has good insulating and temperature characteristics.
